|
SGHP(H)
WATER SOURCE HEAT PUMP UNIT
Indoor installation
Cooling capacity from 297 to 1354 KW
Heating capacity from 345 to 1562 KW
Characteristics
Environment-friendly R 4a refrigerant
Temperature of hot water is up to 65˚C
Semi-hermetic screw compressor
Optional
Total and partial heat recovery
Copper/nickel or titanium heat exchanger
Low temperature operation
Compressor noise eliminator
http://www.cdhvac.com.cn/en/Upload/WebEditor/2008_10/11091200931.pdf
| Description: |
|
SGHP(M)
WATER SOURCE HEAT PUMP UNIT
Indoor installation
Cooling capacity from 535 to 3664 KW
Heating capacity from 577 to 4169 KW
Characteristics
High efficient condenser with large heat exchanger area
Flooded type evaporator increase evaporate temperature
Big fouling factor design
Optional
Total and partial heat recovery
Copper/nickel heat exchanger
Brine water chiller (between +4˚C and -7˚C, using glycol solution)
http://www.cdhvac.com.cn/en/Upload/WebEditor/2008_10/11091247420.pdf
| Description: |
|
SGHP(MH)
WATER SOURCE HEAT PUMP UNIT
Indoor installation
Cooling capacity from 393 to 2765 KW
Heating capacity from 435 to 3024 KW
Characteristics
65˚C hot water outlet
High efficient condenser with large heat exchange area
Flooded evaporator increases evaporation temperature
Big fouling factor design
Optional
Total and partial heat recovery
Copper/nickel heat exchanger
Brine chiller (between +4˚C to -7˚C, using glycol solution)
http://www.cdhvac.com.cn/en/Upload/WebEditor/2008_10/11091341294.pdf
|
|
|
